Electrical Problems Homeowners Should Be Aware Of
Electrical troubles are among the most common causes of fires and other accidents at home. A lot of families have lost their properties, and in most cases, lost the lives of their loved ones because of electrical fires.
To protect your family and property, it is vital to know the signs of electrical problems at home. On this list, we have gathered 10 of the most common signs of residential electrical problems that you should be aware of to prevent accidents and larger issues from happening.
1. Malfunctioning Light Switches
A switch should work properly whenever you turn it on and off, especially if it is newly installed.
If you just had your light switches installed or you just moved into a new house, only to find that the switches don’t work correctly, there is a possibility that they are poorly installed, or there could be problems with the wiring or outlet.
Any issues related to this should be taken care of by skilled electricians to avoid further problems.
2. Lights Fluctuating
There a possibility of a huge problem going on with your home’s electrical system if the lights are fluctuating between dim and bright.
There might be a bad connection in the panel, or different types of light wattage were used. To ensure your safety, you should call an electrician to address the situation right away.
3. Frequent Burning of Light Bulbs
Several reasons are associated with a burning light bulb. This might be due to bad wiring on the mains and the circuit, the bulb’s wattage is too high, there are too many bulbs attached in one switch or a poor connection.
Resolving this issue needs a professional who can check and identify the real cause of the problem. It isn’t safe for someone who doesn’t have the proper training and skills to try solving the problem. It might only lead to catastrophic results.
4. Recessed Light Goes On and Off
Most recessed lighting fixtures are fitted with safety devices that enable them to cut the power when it gets too hot.
If the recessed lighting at your home goes on and off, there is a possibility that the wattage used in the bulb is too high, or the bulb is too close on the insulation. Regardless of the reason, you must have professionals to check it right away.
5. Electrical Surges Very Often
Due to particular events, such as a power line damage or lightning, we get to experience electrical surges that normally last a microsecond. However, frequent electrical surges can damage your home appliances and other electrical components at home.
In some cases, homeowners experience excessive electrical surges due to problems with their home’s electrical wirings or grid, and sometimes due to low-quality devices and powerboards connected to their outlets. Make sure to seek advice from professional electricians to resolve these types of problems.
6. Circuit Breaker Constantly Tripping
Circuit breakers are installed in your home to prevent electrical problems from escalating into a fire. When many electrical items are used at the same time that it would be too much for the circuit breaker to handle the current load, it will heat up and trip.
You can avoid this problem by limiting your use of power-consuming items at the same time.
7. Voltage Sags and Dips
Among the primary reasons for voltage sags and dips are a faulty power grid and substandard electrical materials. To avoid this from happening, make sure that the electricians you hire are professionals, and that they use high-quality electrical materials.
8. Circuit Overload
With so many new electric devices going out in the market, most homes don’t have enough power points to accommodate all appliances altogether.
A lot of homeowners fail to realise the fact that all these new addition to their homes can cause overloading to the power boards.
To prevent circuit overload, it is recommended to remove any device on the outlet if they are unused, avoid overloading a single circuit, and avoid plugging a power strip to another power strip. Most importantly, be always mindful of how you use and connect your devices at home.
9. Electrical Shocks
Electricity is safe if we use it correctly and cautiously. But in some cases, we experience electric shock even in justing turning on or off our device, and this might a sign of a problem. Electric shocks might occur when there is a problem with the appliance or with the wiring.
Some electric shocks are pretty mild and might not pose a threat. But to ensure safety, you can have your electrical wiring checked by electricians.
10. High Electrical Bill
Many homeowners suffer from extremely high electrical bills. If it is something unusual for your household, you can check with an electrician to see what’s wrong with your electrical system and fix any damage they discover.
There are also some practical steps to lower your electrical bills. These include using electricity wisely, such as unplugging appliances and other devices when not in use, fixing leaks on your home’s hot water system, and looking for a more budget-friendly provider.
You should always prioritise the safety of your home and family. That is why any problem you notice with your electricity, consider getting an electrician to diagnose and fix the problem.